Glo-seal is an extremely durable, high gloss finish for use on gym
floors, wood surfaces, cork, linoleum and concrete. It's super
hard, high shine will resist boiling water, alkali’s, acid, heat and cold.
And it will not rubber burn. Provides a long lasting surface that is
easy to maintain and withstands the heaviest traffic.
Use Directions: Directions for long lasting protection
1. Prepare gym or wood floor by sanding or cleaning. Vacuum
well to remove all dust. Etch concrete floors if necessary.
2. Pour sealer into wide open mouth container and spread with
an applicator or string mop. Never pour directly onto the floor.
3. Apply the first coat of Glo-seal to areas of clean dry floors.
5 to 6 feet wide. Allow to dry thoroughly. (6-12 hours)
4. Buff lightly with rotary machine and a No.2 Steel Wool pad.
Vacuum after buffing.
5. Follow with a second coat of Glo-seal and allow to dry for
6-12 hours or overnight. Should a third coat be necessary
repeat stage 4 before applying the third coat.
6. If desire Glo-seal can be protected with one or two light coats
of anti-slip floor finish.
Coverage per case : 100 sq.m
Cost per 6 X3.8 litres
Cost Per 6 X 3.8LTR Case